Allied Telesis AT-VIEW PLUS 2.3 VLAN MANAGER - Manual (Page 17)

Allied Telesyn AT-VIEW PLUS
VLAN MANAGER
PN 613-50595-00 Rev A Page 17 of 47
IP Address
This is the Host Name or IP Address of the target host.
SNMP
Version
Select the version of SNMP to use in managing the target device.
Note - Before choosing "V2c", make sure that the target device you are connecting to
supports SNMPv2c.
Read Community
This is the community string to use in performing SNMP GET operations on the
target host. By default, this field is set to public.
Write Community
This is the community string to use in performing SNMP SET operations on the
target host. By default, this field is set to private.
Login
User Name
This is the account name to be used to log in to the device. By default, this field is set
to manager. This field is used for non-L2 devices only. For L2 devices, this field is
ignored.
Password
This is the password for the account to be used. This field is used for non-L2 devices
only. For L2 devices, this field is ignored.
Retry
Timeout
The number of seconds VLAN Manager waits before it determines that the device is
not responding. By default, this value is set to 5 seconds.
Count
The number of times VLAN Manager sends SNMP messages to the agent before
giving up. By default, this value is set to 2 retries.
5.1.2 Close
This option closes the active connection with the device and empties the VLAN Information
Window.