Allied Telesis AT-WCC200G - Manual (Page 29)

AT-WCC200G User’s Guide
29
Configuration Tab
The Configuration tab allows you to configure Network and Security.
Under Network you can configure:
❑ Network Mode
Set Network Mode to “Infrastructure” when connecting to an
access point or set to “Ad-Hoc” if you have several stations and
want to set them as local network.
❑ Network SSID
The SSID differentiates one Wireless LAN group name from
another. All access points and all devices attempting to connect
to a specific Wireless LAN group name must use the same SSID.
If the SSID parameter is “ANY,” it will detect the strongest signal of
the wireless station.