Allied Telesis AT-WCC200G - Manual (Page 17)

AT-WCC200G User’s Guide
17
Hardware Installation
LED PWR (Power)
The PWR LED is green when the AT-WCC200G adapter is receiving
power, otherwise it is OFF.
LNK (Link)
The LNK LED blinks green when the AT-WCC200G adapter is connected
to a network successfully and transmitting data. Otherwise, the LNK LED
is OFF.
Checking the
Installation
The LEDs of the AT-WCC200G adapter are clearly visible and the status of
the network link can be seen:
1. Once the device is plugged to the station’s Cardbus slot. The PWR
LED on the Wireless Cardbus Adapter will be ON indicating a normal
status.
2. When the AT-WCC200G is plugged into the station’s Cardbus slot
and the driver is installed, the LNK LED will blink. This indicates that
the device is starting to scan the wireless devices near the
AT-WCC200G adapter.
3. While the AT-WCC200G adapter is linked up and transmitting data
to the access point or to another Wireless LAN station, the LNK LED
will blink.