2 target host, 3 get community, 4 set community – Allied Telesis AT-VIEW PLUS 2.4 AMIGO User Manual
Page 8: 5 configuration file
Allied Telesyn
AT-VIEW PLUS
AMIGO
PN 613-50506-00 Rev B
Page 8 of 38
2.1.2 Target Host
The target host can be specified as a dotted IP address or as a host name.
Example:
Amigo -TargetHost 172.16.18.34
Amigo -TargetHost dvcmgrhub
2.1.3 Get Community
Get Community is an SNMP community string used to get MIB values from the agent. You must
specify the same community string as the one configured on the target host. If the string is not
specified, the default community string "public" is used.
Example:
Amigo -TargetHost 172.16.18.34 -GetCommunity dvcmgrget
2.1.4 Set Community
Set Community is an SNMP community string used to change the values of the agents' MIB
variables. You must specify the same community string as the one configured on the target host. If
the string is not specified, the default community string "private" is used.
Example:
Amigo -TargetHost 172.16.18.34 -SetCommunity dvcmgrset
2.1.5 Configuration File
The configuration file is created by selecting File > Save As. It contains the environment settings for
AMIGO.
Example:
Amigo test.amg