Allied Telesis AT-GS905 - Manual (Page 26)

Installation
26
Using the Switch on a Desktop
The AT-GS905 switch can be used on a desktop or mounted onto the
wall. To wall-mount the switch, refer to Wall- Mounting the Switch on
page 27.
To use the switch on a desktop, perform the following procedure:
1. Remove all equipment from the package and store the packaging
material in a safe place.
2. Attach the four rubber protective feet (provided) to the bottom of
the switch as shown in Figure 5.
Figure 5 Attaching the Rubber Feet
3. Turn the switch over and place it on a flat, secure surface (such as a
desk or table), leaving ample space around the unit for ventilation.
A T-GS905 10/100/1000 Base- T Gigabit Ethernet Switc h
POWER
1 2 3 4 5
100M
1000M
LNK/ACT
FDX
2 3 4 1 5