Allied Telesis AT-VIEW PLUS 3.1 DEVICE MANAGER - Manual (Page 90)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGER
Per Sample
Displays the change in the value between the two pollings. This is Current value -
Previous value.
Per Second
Displays the change in the value per second. This is (Current value - Previous value) /
Polling Interval.
Note - Calculated values are rounded. For example, Number of Error packets is usually very
small so that calculated value is likely to be zero.
7.2.7.3 Regist Menu
Add this window to the user-defined menu (User Menu).
7.2.7.4 Save Polling Data
This button opens the Polling Data Save dialog box used to save collected data to a file. Specify
the name and format of the file in which the data is saved. Select a file format from the options
below. To start saving the data, click OK.
When you start saving data, the button's label changes to "Saving polled data". To close the file
and stop saving the data, click the "Saving polled data" button.
CSV Format
Save the data in comma-separated values (CSV) format.
TAB Format
Save the data in Tab-separated values (TSV) format.
Note - Only the values of the collected RMON variables are saved. Values AT-View Plus Device
Manager calculates from these collected values are not saved.
7.2.7.5 Start Snapshot
Clicking this button opens the Start Snapshot window. Use this window to create an image of the
graph and tables in the RMON tab panel in HTML format. Use the 'Browse' button to select the
directory or folder where you want to save the image.
Note - You can generate an image of the main panel, table data, or charts. The type of image or
device information that you can generate depends on which menu you opened the Start Snapshot
window from. For more information on the file types created in the Start Snapshot window, see
section
5.2.6 .
PN 613-50664-00 Rev B Page 90 of 118