Installing the router – Allied Telesis AR400 Series Router User Manual
Page 7
Quick Install Guide
7
C613-04058-00 REV
B
Installing the Router
Warning This equipment must be earthed.
Prepare to install the router
1.
Read the safety information
Read the safety information included in this Quick Install Guide. This Quick Install
Guide is also on the Documentation and Tools CD-ROM and you can download
a copy fr
2.
Unpack the router.
Verify the package contents. If any items are damaged or missing, contact your
sales representative.
3.
Place the router in its operating location.
See the previous section
for guidelines on choosing
a suitable location.
For instructions on rack or wall mounting the router, see the AR400 Series
Hardware Reference.
4.
Install expansion options.
If you purchased an optional PIC, install it now by following the Port Interface
Card Quick Install Guide. That guide can be found with the PIC, on the
Documentation and Tools CD-ROM, or can be downloaded from
.
5.
Check the supply voltage and the router’s rated voltage.
AR400 Series routers are fitted with a universal mains power supply that will
function over the range 100-240 VAC and 50–60Hz.
Warning The specific power supply requirements for a particular model are
clearly displayed on the rear or underside of the router. If the supply is outside
the accepted range for the router, the router may not operate or damage to the
router may result.