Allied Telesis AT-AR236E - Manual (Page 12)

12
Easy Start Easy Start Easy Start Easy Start Easy Start
ii Ensure that the field Connect Using indicates the model of your Ethernet Card that
is connected to your ADSL Router.
(This is important especially if you have more than one Local Area Connection icons displayed
at the Network and Dial-up Connections / Network Connections window. Ensure that you have
selected the correct one.)
Select Internet Protocol (TCP/IP) and click Properties .
iii Select the option Obtain an IP
address automatically and click OK .
Click OK again to close.
Ensure that your ADSL Router is
powered on. Restart your system.
Proceed to Step 3 .
2.1.2 For Windows ® 2000 / Windows ® XP
i Windows® 2000:
a) From your Windows desktop, right-click on the icon My Network Places and
select Properties .
b) At the Network and Dial-up Connections window, right-click on the Local Area
Connection icon and select Properties .
Windows® XP:
(Instructions are based on default Start menu option)
a) From your Windows desktop, click Start > All Programs > Accessories >
Communications > Network Connections .
b) Right-click on the Local Area Connection icon that reflects the model of your
Ethernet Card that is connected to your ADSL Router and click Properties .
(This screen shot uses 3Com EtherLink
Ethernet card model as an example).