Allied Telesis AlliedView-EMS 3.10 AMIGO - Manual (Page 8)

2.1.4 Get Community
Get Community is an SNMP community string used to get MIB values from the
agent. You must specify the same community string as the one configured on
the target host. If the string is not specified, the default community string
"public" is used.
Example:
Amigo -TargetHost 172.16.18.34 -GetCommunity dvcmgrget
2.1.5 Set Community
Set Community is an SNMP community string used to change the values of the
agents' MIB variables. You must specify the same community string as the one
configured on the target host. If the string is not specified, the default
community string "private" is used.
Example:
Amigo -TargetHost 172.16.18.34 -SetCommunity dvcmgrset
2.1.6 User Account Name
If you specified 3 (SNMPv3) for the SNMP Version, you must also specify a User
Account Name that is already configured on the target host.
Examples:
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName AlliedView
-SecLevel noAuthNoPriv
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName AlliedView1
-SecLevel authNoPriv -AuthProtocol SHA -AuthPassword PASS1233
2.1.7 Security Level
If you specified 3 (SNMPv3) for the SNMP Version, you must also specify a
Security Level that is configured for the User Account Name on the target host.
The available Security Levels are noAuthNoPriv, authNoPriv, and authPriv.
AlliedView™-EMS 3.10 AMIGO USERS GUIDE Page 8 of 43