Acer 4010 - Manual (Page 62)

54 Chapter 3
Disassembly Procedure Flowchart
The flowchart on the succeeding page gives you a graphic representation on the entire disassembly sequence
and instructs you on the components that need to be removed during servicing. For example, if you want to
remove the system board, you must first remove the keyboard, then disassemble the inside assembly frame in
that order.
Start
Battery
HDD Cover ODD Module
RAM/Wireless
Cover
*2 *2
HDD Module
Wireless LAN
Card
Memory
IO Bezel
E*2
*2
Heatsink
Cover
special screw for thermal*3
Ex1
Thermal
Module
CPU
ODD
Connector
Board
ODD Holder
ODD Drive
*2 back side
*4 left/right side
E*3
Middle Cover
B*2
Keyboard
*4
(right and left hinges)
LCD Module
B*2
Switch Board
B*5
E*16+B*2
Lower and
Upper Case
Assembly
Upper Case
Assembly
Lower Case
Assembly
3-in-1 Cover Speaker Set Modem Board
Touchpad
Bluetooth
Module
Touchpad
Board
Touchpad
Bracket
B*2
Main Board
*4
E*2
*2 screw nuts
VGA Heatsink
*3
B*2