Acer 4010 - Manual (Page 48)

40 Chapter 2
Advanced
The Advanced menu screen contains parameters involving your hardware devices. It also provides advanced
settings of the system.
The table below describes the parameters in the screen. Settings in boldface are the default and suggested
parameter settings.
.
Parameter Description Options
Infrared Port Enables, disables or auto detects the infrared port. Disabled /Disabled/Auto
Parallel Port Enables, disables or auto detects the parallel port. Enabled /Disabled/Auto
Mode Sets the operation mode of the parallel port. ECP , EPP, Output only or Bi-
directional
Base I/O address Sets the I/O address of the parallel port. 378 /278
Interrupt Sets the interrupt request of the parallel port. IRQ7 /IRQ5
DMA channel Sets a DMA channel for the printer to operate in
ECP mode. This parameter is enabled only if Mode
is set to ECP. DMA3 /DMA1
PhoenixBIOS Setup Utility
Info. Main Advanced Security Boot Exit
Item Specific Help
Internal Touchpad:
Configure Infrared Port
using options:
[Disable]
No configuration
[Enabled]
User configuration
[Auto]
BIOS or OS chooses
configuration
(OS Controlled)
Displayed when controlled
by OS
F1 Help ↑ ↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ← → Select Menu Enter Select 4 Sub - Menu F10 Save and Exit
Infrared Port (FIR):
[Both]
[Enabled]