Allied Telesis AlliedView-EMS 4.0.2 QoS-Manager - Manual (Page 129)

AlliedView™-EMS 4.0.2 QoS Manager User’s Guide Page 129 of 146
Property Name Description Valid Values
•
IPv4 address[/mask] - IPv4 is
in dotted decimal notation,
mask is 0..32.
•
IPv6 address[/mask] - IPv6 is
in colon separated hex digit
notation, mask is 0..128.
This value can also be set to
"any".
IP DSCP This the Code Point bits of the
DiffServ field of an IP packet
This can be set by entering one or
more integers from 0-63. Input can
be a comma separated list or a
range (specified as m-n) or a
combination of both. (e.g. 2, 4-7)
This value can also be set to "any".
IP Type of Service Specifies the value of the
precedence field within the TOS
(Type of Service) byte of an IP
packet
Range: any, 0-7
IP Fragmented Determines if the IPv4 packets are
fragmented.
•
yes
•
no
•
any
IP Options Determines if the IPv4 header
options will be inlcuded.
•
yes
•
no
•
any
IP Flow Label Specifies the IPv6 Flow Label in an
IPv6 Packet.
Range: any, 0-1048575
Destination IPX
Address
Specifies the destination network
address of an IPX packet.
This can be set by entering a 4-byte
hexadecimal value. (00000001-
FFFFFFFF)
This can also be set to "any".
IPX Packet Specifies the value of the Packet
Type field of an IPX packet.
This can be set by selecting any of
the following values:
•
NLSP
•
RIP
•
SAP
•
SPX
•
NCP
•
NETBIOS
•
any