Allied Telesis x900 Series Switch and SwitchBlade x908 - Manual (Page 22)

Installation and Safety Guide
21
7. Save the configuration.
Save the current configuration as the default startup configuration by using
the commands:
awplus>enable
awplus#copy running-config startup-config
Alternatively, you can save the current configuration with a different file
name and then set the switch to load this file when it restarts by using the
commands:
awplus>enable
awplus#copy running-config .cfg
awplus#configure terminal
awplus(config)#boot config-file .cfg
8. On the PC’s web browser, bypass the HTTP proxy server, if necessary.
9. Point your web browser at the IP address configured in step 4.
10. At the login screen, enter the user name and password you set in step 6.
The System Status page is displayed. Select options from tabs to configure
and manage the switch. For online help, click the Help button on each tab.