AMT Datasouth documax 3300 User Manual
Page 90

User’s Guide
4-14 Features and Profiles
Menu 2: Forms Control (Cont’d)
Printer Displays
Values
Description
Manual Tear
xxx
FF
The printer will perform a form feed before
moving to the tear position after pressing
the Tear Off key.
TOF
The printer will move to the tear position after
printing crosses the next forms boundary
after pressing the Tear Off key.
No FF
This value will move the paper the tear
distance only. No form feeds are
performed.
Manual Time ###s
OFF
The Tear Off key must be pressed to return the
forms to the print position.
1
.
.
30
The time in seconds that the form will be in the
tear position before automatically returning
to the print position.
This feature works only with the Manual Tear
key.
Auto Tear
xxx
OFF
Values set for “Off”, the printer will not move
the form into the tear position if the form is
at top and no data is being transmitted.
IDLE
Value set for “Idle”, the printer will move the
form into the tear position if the form is at
top and no data is being transmitted.
PAGE
Moves the form to the tear bar position on
every page break while on line. The form
will retract after the time specified by the
“Auto Time X” feature has expired.