AMT Datasouth documax 3300 User Manual
Page 184
User’s Guide
G-2 Escape Sequence Quick Reference
Epson FX (Cont’d)
ASCII
Command
Epson FX
Command Description
ESC !
Master Print mode selection
ESC #
Cancel Most Significant Bit (MSB) function.
ESC %
Select character set from ROM or from RAM.
ESC &
Define User-defined characters in RAM
ESC *
Select Graphic mode.
ESC –
Select/Cancel underlining.
ESC /
Select Vertical Tab Channel.
ESC 0
Set line spacing to 1/8 inch.
ESC 1
Set line spacing to 7/72 inch.
ESC 2
Set line spacing to 1/6 inch.
ESC 3
Set line spacing to n/216 inch.
ESC 4
Select italic character set.
ESC 5
Cancel italic character set.
ESC 6
Enable upper character set (80 hex to 9F hex and FF hex).
ESC 7
Enable extended control codes (Turns off ESC 6).
ESC 8
Disable paper out detector.
ESC 9
Enable paper out detector.
ESC :
Copies resident characters (ROM) to RAM.
ESC <
Enable one line unidirectional printing.
ESC =
Set MSB to 0 (Sets 8
th
bit low).
ESC >
Set MSB to 1 (Sets 8
th
bit high).
ESC ?
Reassign graphic codes.