AMT Datasouth documax 3300 User Manual
Page 188
User’s Guide
G-6 Escape Sequence Quick Reference
IBM Proprinter (Cont’d)
ASCII
Command
IBM Proprinter
Command Description
ESC 5
Select/Cancel automatic line feed.
ESC 6
Select character set 2.
ESC 7
Select character set 1.
ESC 8
Disable paper out detector.
ESC 9
Enable paper out detector.
ESC :
Select 12 characters per inch.
ESC <
Enable one line unidirectional printing.
ESC =
Start downloading characters.
ESC A
Set line spacing to n/72 inch.
ESC B
Set vertical tabs.
ESC C
Set forms length in lines.
ESC C
Set forms length in inches when first variable is a null.
ESC D
Set horizontal tab.
ESC E
Select emphasized printing.
ESC F
Cancel emphasized printing.
ESC G
Select double-strike printing.
ESC H
Cancel double-strike printing.
ESC I
Enable/disable printing of characters stored in the lower control
code area (00hex to 31 hex).
ESC J
Perform an immediate line feed of n/216 inch.
ESC K
Select normal-density graphics.
ESC L
Select double-density graphics (half speed).