AMT Datasouth documax 3300 User Manual
Page 185
User’s Guide
Escape Sequence Quick Reference G-3
Epson FX (Cont’d)
ASCII
Command
Epson FX
Command Description
ESC @
Resets printer.
ESC A
Set line spacing to n/72 inch.
ESC B
Set vertical tabs.
ESC C
Set forms length in lines.
ESC C
Set forms length in inches when first variable is a null.
ESC D
Set horizontal tab.
ESC E
Select emphasized printing.
ESC F
Cancel emphasized printing.
ESC G
Select double-strike printing.
ESC H
Cancel double-strike printing.
ESC I
Enable/disable printing of characters stored in the lower control
code area (00hex to 31 hex).
ESC J
Perform an immediate line feed of n/216 inch.
ESC K
Select single-density graphics.
ESC L
Select double-density graphics.
ESC M
Select Elite (12 cpi) mode.
ESC N
Set perforation skip to n lines.
ESC O
Disable perforation skip mode.
ESC P
Select Pica (10 cpi) mode.
ESC Q
Set right margin.
ESC R
Select international character set.
ESC S
Select Superscript or Subscript characters.