Samsung PS-50P2HT - Manual (Page 51)

51
Setting the Picture (Video/S-Video/AV2)
ENG
➣
This function doesn’t operate in TTX mode.
Click “Settings” of the main icons and the Settings control screen appears.
Info Grid shows some basic information necessary to the Settings control.
When each of functions is selected, the set value of the selected function is displayed on the screen.
When Select All is selected, the default value returns. If you change this value in this screen, it switches
to CUSTOM in Picture setting mode automatically.
ΠPicture : Control the picture having the Video,
S-Video, AV2 input source.
´ Contrast : Adjusts the contrast of the selected
display.
ˇ Brightness : Adjusts the brightness of the
selected display.
¨ Sharpness : Adjusts the sharpness of the
selected display.
ˆ Color : Adjusts the color of the selected display.
Ø Tint : Adjusts the tint of the selected display.
(NTSC Only)
∏ Color Tone : Adjusts the color tone of the selected
display. (PAL Only)
You can only control Displays for which the Power Status is ON. If you
have not selected a setup the value displayed will be the Factory Default
Value.
Setting the Picture RGB (PC)
ΠPicture RGB : Controls the picture having the PC
input source.
´ Contrast : Adjusts the contrast of the selected
display.
ˇ Brightness : Adjusts the brightness of the
selected display.
¨ Red Gain : Adjusts the red gain of the selected
display.
ˆ Green Gain : Adjusts the green gain of the
selected display.
Ø Blue Gain : Adjusts the blue gain of the selected
display.