ATEN Altusen KVM on the Net KN2108 - Manual (Page 94)

Administrator Login Failure
If you are unable to perform an Administrator login (because the Username
and Password information has become corrupted, or you have forgotten it,
for example), you can clear the login information with the following
procedure:
1. Power off the KN2018 / KN2116 and remove its housing.
2. Short the jumper labeled J8.
3. Power on the switch.
4. When the Link and 10/100Mbps LEDs flash, power off the switch.
5. Remove the jumper cap from J8.
6. Close the housing and start the KN2018 / KN2116 back up.
After you start back up, you can use the default Username and Password
(see p. 23) to log in.
2005-08-24
KN2018 / KN2116 User Manual
82