ATEN Altusen KVM on the Net KN2108 - Manual (Page 24)

Stacking
The KN2108 / KN2116 can be placed on any appropriate level surface that
can safely support its weight plus the weight of its attached cables. To place
the KN2108 / KN2116, or to stack units if you are daisy chaining them,
remove the backing material from the bottom of the rubber feet that came
with this package, and stick them onto the switch’s bottom panel at the
corners, as shown in the diagram, below:
Note: To ensure adequate ventilation, allow at least 5.1 cm on each side, and
12.7cm at the back for power cord and cable clearance.
2005-08-24
KN2018 / KN2116 User Manual
12