APC AP9254 User Manual

Page 36

Text mode
Original mode

Uninstalling Pairing

1. Press either Control key twice to bring up the On-Screen Display

Administrator Channel List menu.

2. Press Control twice again, select ‘‘Administrator Functions’’ and

press Enter.

3. Select ‘‘Unit Configuration’’ and press Enter.

4. Change the unit configuration to ‘‘Option 1, Tiered’’.

5. Press Enter to save your selection and Esc to exit OSD.

6. Disconnect the serial and video cables from both switch units.

7. Attach a keyboard and monitor directly to the slave unit.

8. Repeat instructions 1-5 on the slave unit.

9. The units may now be cascaded together or used separately.

Note:

Please note that the channel list will need to be modified
according to the Basic Channel Maintenance instructions in the
manual after uninstalling pairing.

This manual is related to the following products:

AP9258