APC AP9254 - Manual (Page 10)

7. Power-up your APC KVM Switch unit first, then all attached servers.
The APC KVM Switch and all attached servers should
be powered-down before servicing the unit. Always
disconnect the power cord from the electrical socket.
100-240V ,
.1A,
50/60 Hz
1
0
!
6
1. Remove the side screws that secure the cover on your KVM Switch.
2. Line up the holes in the side brackets with the screw holes in the
side of the KVM Switch unit.
3. Using the previously removed screws, thread one through each of
the holes in the sides of the rack mount brackets and into the KVM
Switch cover. Tighten them securely.
2.2 Rack Mount Installation
POWER
100-240V~, .1a, 50/80Hz
MADE IN USA
7
8
5
6
3
4
1
2
T 2A, 250 V
AC
USER
PAIRING