Samsung PS50B679S1S - Manual (Page 36)

English - 36
Connecting WPS (Wi-Fi Protected Setup)
❑
If Security Key is already set
„
: In access point list, select WPS.
You can select N PBC, PIN, Security Key.
Connecting by using • PBC: Select a PBC (Push Button Configuration). Press the
PBC button on the AP (access point) within 2minutes, and wait for connection.
Connecting by using • PIN: Select a PIN (Personal Identification Number).
The message showing the PIN Code is displayed. Input the PIN Code at AP N
device within 2minutes. Select OK and wait for connection.
Try again if connecting operation doesn’t work N
When the connection is not established although tried again, reset the access N
point. Please refer to a manual of each access point.
Connecting by using • Security Key: When selecting Security Key, the input
window is displayed. Input the security key and press Blue button.
Try again if connecting operation doesn’t work. N
If Security Key is not set
„
: When the security setting of AP that supports WPS
is NONE, you can select PBC, PIN, None Security. None Security is capable of
connecting to AP directly without using WPS function.
Process of N PBC, PIN is same as above. Refer to if Security Key is already set.
Try again if connecting operation doesn’t work. N
Ad-hoc
„
: You can connect to a mobile device without an access point through
the ‘Samsung Wireless LAN Adapter’ by using a peer to peer network.
How to connect to new Ad-hoc •
1. Choose Select a network, then a device list is displayed.
2. While in the device list, press the Blue button on the remote or select Ad-hoc.
The message N The existing network system may have limited functionality.
Do you want to change the network connection? is displayed.
3. Input the generated Network Name(SSID) and Security Key into the device you want to connect.
How to connect an existing Ad-hoc device
•
1. Choose Select a network, the device list is displayed.
2. Select the device you want in the Device list.
3. If security key was applied, input the security key again.
If network doesn’t operate normally, please check the N Network Name(SSID) and Security Key again.
If the Security Key is incorrect, it may be the reason for the malfunction.
*
The existing network system may have limited
functionality. Do you want to change the network
connection?
No Yes
*
* *
*
*
Wireless Network Setup
Select a network
n Move E Enter R Return
Search
Ad-hoc
AP_1
AP_2
AP_3
AP_4
*
PBC
PIN
Security Key
3/9
*
* *
*
*
Wireless Network Setup
Select a network
n Move E Enter R Return
Search
Ad-hoc
AP_1
AP_2
AP_3
AP_4
*
PBC
PIN
Security Key
3/9
*
Press the PBC button on the access point.
Access Point Name : AP_3
Cancel
*
Press OK After input TV’s Pincode in the access
point’s setup.
Access Point Name : AP_3
PIN Code : 12345678
Cancel OK
* *
*
*
* *
* *
Wireless Network Setup
Security Key
n Move Number E Enter R Return
_
A B C D E F G
H I J K L M N
O P Q R S T U
V W X Y Z
0~9 Number
Lowercase
Delete
Done
BN68-02217A-Eng.indb 36 2009-05-20 �� 4:54:57