Samsung PS50B679S1S - Manual (Page 13)

English - 13
Manual Store
❑
Scans for a channel manually and stores it in the TV’s memory.
Digital Channel
„
(Digital)
Digital Channel is only available in DTV mode. N
Channel • : Set the Channel number using the ▲, ▼ or number ( 0~9) buttons.
Frequency • : Set the frequency using the number ( 0~9) buttons.
Bandwidth • : Set the bandwidth using the ▲ or ▼ buttons.
When it has finished, channels are updated in the channel list. N
Analogue Channel „
Manual store for analogue channel.
Programme • (Programme number to be assigned to a channel): Sets the programme number using the ▲, ▼ or number ( 0~9)
buttons.
Colour System → Auto / PAL / SECAM / NTSC 4.43
• : Sets the colour system value using the ▲ or ▼ button.
Sound System • → BG / DK / I / L : Sets the sound system value using the ▲ or ▼ button.
Channel • (When you know the number of the channel to be stored): Press the ▲ or ▼ button to select C (Air channel) or S
(Cable channel). Press the ► button, then press the ▲, ▼ or number ( 0~9) buttons to select the required number.
If there is abnormal sound or no sound, reselect the sound standard required. N
Search • (When you do not know the channel numbers): Press the ▲ or ▼ button to start the search. The tuner scans the
frequency range until the first channel or the channel that you selected is received on the screen.
Store
• (When you store the channel and associated programme number): Set to OK by pressing the ENTERE button.
Channel mode N
- C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode.
- S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.
Satellite
„
Satellite • : Selects the satellite using the up/down buttons.
Index • : Selects the transponder using the up/down buttons.
Scan Mode • : Selects either free or all channels to store.
Frequency • : Sets the frequency using the numeric buttons.
Symbol Rate • : Sets the symbol rate using the numeric or up/down buttons.
Polarity • : Sets the Polarity using the up/down buttons.
Network Search • : Enable/Disable network search using the up/down buttons.
Signal Quality • : Display the current status of broadcasting signal.
Information on a satellite and its transponder is subject to change depending on the broadcasting conditions. N
Cable Search Option
❑
You can set additional search options such as frequency and symbol rate for cable network searching. (Depending on the each
country)
Freq.Start • : Displays the frequency start values.
Freq.Stop • : Displays the frequency stop values.
Modulation • : Displays available modulation values.
Symbol Rate • : Displays available symbol rates.
If the N Freq.Start value is bigger than Freq.Stop value, the warning message is displayed.
Continued...
BN68-02217A-Eng.indb 13 2009-05-20 �� 4:54:40