Samsung PS50B679S1S - Manual (Page 11)

English - 11
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
The Screen Saver is activated if there is no remote control key input for longer than 1 minute while Plug & Play is running. N
The Screen Saver is activated if there is no operating signal for longer than 15 minutes. N
If you accidentally select the wrong country for your TV, the characters on the screen may be wrongly displayed. N
1. Press the POWER button on the remote control. Select the OSD Language. menu
is automatically displayed. Select the appropriate language by pressing the ▲ or ▼
button. Press the ENTERE button to confirm your choice.
2. Press the ◄ or ► button to select Store Demo or Home Use, then press the
ENTERE button.
We recommend setting the TV to N Home Use mode for the best picture in your
home environment.
Store Demo N mode is only intended for use in retail environments.
If the unit is accidentally set to N Store Demo mode and you want to return to Home Use (Standard): Press the Volume button on
the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
3. Press the ENTERE. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTERE button to confirm your
choice.
4. Press the ▲ or ▼ button to memorize the channels of the selected connection, then press the ENTERE button.
Air • : Air antenna signal.
Cable • : Cable antenna signal.
Satellite • : Satellite antenna signal.
5. Press the ▲ or ▼ button to select the Antenna source to memorize. Press the ENTERE button to select Start.
When selecting N Air or Cable,
Digital & Analogue • : Digital and Analogue channels.
Digital • : Digital channels.
Analogue • : Analogue channels.
For more detailed description of selecting Cable mode, refer to page 12. N
When selecting N Satellite, you can configure LNB Setting. (Fore more detailed description of LNB Setting, refer to page 15.)
All • : Selects All as Channel type.
T • V: Selects TV as Channel type.
Ra • dio: Selects Radio ad Channel type.
Select the satellite and the scan mode to scan. N
The N channel search will start and end automatically.
6. The message Set the Clock Mode is displayed. Press the ENTERE button. Press the ▲ or ▼ button to select Auto, then Press
the ENTERE button.
If you select N Manual, Set current date and time is displayed. (For a more detailed description of Manual, refer to page 25)
If you have received a digital signal, the time will be set automatically. N
7. The brief instruction on How to get the best performance from your new HDTV is displayed. Press the ENTERE button.
This menu is available N HD Connection Guide in the Support menu.
You can change previous or next page by pressing the N ◄ / ► button.
8. The message Enjoy your TV. is displayed.
If you want to view the TV immediately, select the N Watch TV.
If you want to view the N See Product Guide, press the ENTERE button.
If you want to reset this feature...
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup,
then press the ENTERE button.
2. Press the ENTERE button again to select Plug & Play.
3. Enter your 4 digit PIN number. The default PIN number of a new TV set is ‘0-0-0-0’.
If you want to change PIN(Personal Identification Number), refer to page 27. N
The N Plug & Play feature is only available in the TV mode.
Plug & Play
Select the OSD Language.
Menu Language :
E Enter
▲
Nederlands
English
Eesti
▼
Setup
Plug & Play ►
Time
Language
Subtitle
Digital Text
: Enable
Security
Network
General
BN68-02217A-Eng.indb 11 2009-05-20 �� 4:54:40