Samsung PS50B560T7W - Manual (Page 26)

English - 26
Supported Program
Self Diagnosis
❑
Picture Test
„
If you think you have a picture problem, perform the picture test. Check the Colour pattern on the screen to see if the problem still
exists.
Does the problem still exist with this test photo? N appears on the screen.
If the test pattern does not appear or there is noise in the test pattern, select Yes.
If the test pattern is properly displayed, select No.
Yes • : There may be a problem with the TV. Contact Samsung’s Call Center for assistance.
No • : There may be a problem with your external equipment. Please check your connections. If the problem still persists, refer
to the external device’s user manual.
Sound Test
❑
If you think you have a sound problem, please perform the sound test.
You can check the sound by playing a built-in melody sound through the TV.
Does the problem still exist with this sound test? N appears on the screen.
If during the sound test you can hear sound only from one speaker or not at all, select Yes.If you can hear sound from the
speakers, select No.
Yes • : There may be a problem with the TV. Contact Samsung’s Call Center for assistance.
No • : There may be a problem with your external equipment. Please check your connections. If the problem still persists, refer
to the external device’s user manual.
If you hear N no sound from the TV’s speakers, before performing the sound test, make sure Speaker Select is set to TV speaker
in the Sound menu.
The melody will be heard during the test even if N Speaker Select is set to External Speaker or the sound is muted by pressing
the M MUTE button.
Signal Strength „ (Digital channels only)
You can adjust your antenna to improve the reception of available digital channels.
If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength. N
Continue to adjust the antenna until you find the best position with the strongest signal.
Support / Input
Melody → Off / Low / Medium / High „
The TV power on / off melody sound can be adjusted.
The Melody does not play N
When no sound is output from the TV because the - MMUTE button has been pressed.
When no sound is output from the TV because the - – (Volume) button has been pressed.
When the TV is turned off by - Sleep Timer function.
Light Effect (PS50B560 only)
„
You can turn on/off the blue LED on the front of TV according to the situation. Use it for saving power or when the LED dazzles your
eyes.
Off • : The blue LED is always off.
In Standby • : The blue LED lights while in Standby mode and it turns off when your TV is turned on.
Watching TV • : The blue LED lights when watching TV and it turns off when your TV is turned off.
Always • : The blue LED always lights.
Set the Light Effect to Off to reduce the power consumption. N
BN68-02332A-Eng.indb 26 2009-06-09 �� 2:27:46