Plug & play feature – Samsung PS50A557S3F User Manual
Page 10
English - 10
Plug & Play Feature
When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.
If you accidentally select the wrong country for your TV, the
characters on the screen may be wrongly displayed.
Any functions related to Digital TV (DVB) will only work in
countries or areas where DVB-T (MPEG2) digital terrestrial
signals are broadcasted. Please confirm with your local
dealer if you can receive DVB-T signals. Although this TV set
follows the DVB-T specification, maintaining compatibility with
the future coming DVB-T digital terrestrial broadcasts is not
guaranteed. Several functions may not be available in some
countries.
1 If the television is in standby mode, press the POWER button
on the remote control. The message
Start Plug & Play is
displayed. Press the
ENTER button.
The Language menu will automatically appear after several
seconds.
Select the appropriate language by pressing the ▲ or ▼
button.
Press the
ENTER button. The message Select ‘Home Use’
when installing this TV in your home. is displayed.
4 Press the ◄ or ► button to select Store Demo or Home Use,
then press the
ENTER button. The message to check the
connected status of the antenna is displayed.
The default selection is
Home Use.
We recommend setting the TV to
Home Use mode for the
best picture in your home environment.
Store Demo mode is only intended for use in retail
environments.
If the unit is accidentally set to
Store Demo mode and you
want to return to
Home Use (Standard): Press the Volume
button. When the volume OSD is displayed, press and
hold the
MENU button for 5 seconds.
5 Make sure that the antenna is connected to the TV.
Press the
ENTER button. The Country menu is displayed.
Select your country or area by pressing the ▲ or ▼ button.
Press the
ENTER button.
The message
Some DTV functions may not be available.
Digital Scan? is displayed.
This function is supported for all countries except for the
following countries: France, Germany, Italy, Netherlands,
Spain, Switzerland, United Kingdom, Austria.
If your country supports the DTV functions, the message is
not displayed. Then you can follow the instructions from step
1. When the local service provider does not support DTV
broadcasting but you choose a DTV supporting country, it
enters the DTV Plug & Play but DTV functions may not work
properly.When
No is selected, follow the instructions from step
to 10. When Yes is selected, follow the instructions from
step
11.
Continued...
Plug & Play
Start Plug & Play.
OK
Enter
Plug & Play
Language
Move
Enter
English
Deutsch
Français
Italiano
▼
Plug & Play
Select ‘Home Use’
when installing this TV in your home.
Move
Enter
Store Demo
Home Use
Plug & Play
Check antenna input.
Enter
OK
Plug & Play
Country
Move
Enter
▲
United Kingdom
Austria
Eastern Europe
Others
Plug & Play
Some DTV functions may not be available.
Digital Scan?
Move
Enter
Skip
Yes
No
Plug & Play
P 1 C -- 40 MHz
0 %
Enter
Skip
Start
BN68-01427A-Eng.indb 10
2008-03-10 오후 3:14:20