Samsung NP600B4C-A01US - Manual (Page 76)

74 75
Chapter 2.
Using the computer
Using the TPM Security Device
(Optional)
4
Press the F10 key to save the changes.
5
When the computer restarts automatically and the Samsung
logo screen appears, press the F2 key repeatedly.
6
Select the Security > TPM Configuration > Change TPM
Status item and set the item to Enable and Activate.
SAMSUNG BIOS Configuration
TPM Configuration
TPM Support
Change TPM Status
Security Chip State
Security
[Enabled]
[
No Change ]
Disabled and Deactivated
No Change
Clear
Enable and Activate
Disable and Deactivate
7
Press the F10 key to save the changes.
8
The computer automatically restarts. Initialization of the TPM
chip has been completed. Now, install the TPM program and
register the TPM program.