Warning – Alliance Laundry Systems B-Series User Manual

Page 9

802750

Do not modify the plug provided with the washer - if it
will not fit the outlet, have a proper outlet installed by
a qualified electrician.

NOTE: Have a qualified electrician check the
polarity of the wall receptacle. If a voltage reading
is measured other than that in Figure 11, the
qualified electrician should correct the problem.

NOTE: The wiring diagram is located in the
control hood.

Step 8: Check Installation

Refer to Installer Checklist on the back cover of this
manual and make sure that washer is installed
correctly.

Run washer through one complete cycle to make sure
it is operating properly.

Improper connection of the equipment-
grounding conductor can result in a risk
of electric shock. Check with a qualified
electrician or service person if you are in
doubt as to whether the washer is
properly grounded.

W216

WARNING

This unit is equipped with a three-prong
(grounding) plug for your protection
against shock hazard and should be
plugged directly into a properly grounded
three-prong receptacle. Do not cut or
remove the grounding prong from this
plug.

W213

WARNING