Alliance Laundry Systems B-Series - Manual (Page 2)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 802750 2
Washer Dimensions
Before You Start
Supplies
For most installations, the basic supplies you will need
are:
Parts Included
An accessories bag has been shipped inside your
washer. It includes:
• Two fill hoses with washers and filter screens.
Refer to step 2 of Installation.
• Four rubber feet. Refer to step 4 of Installation.
• Beaded strap. Refer to step 3 of Installation.
• Installation Instructions.
• User’s Guide.
• Warranty Bond.
NOTE: If the washer is delivered on a cold day
(below freezing), or is stored in an unheated room
or area during the cold months, do not attempt to
operate it until the washer has had a chance to
warm up.
NOTE: Some moisture in the wash drum is normal.
Water is used during testing at the manufacturer.
NOTE: Install dryer before washer. This allows
room for attaching exhaust duct.
FLW2164N
Figure 1
FLW2164N
2 in. (5.1 cm)
26.9 in. (68.3 cm) 28 in. (71.1 cm)
43 in.
(
109.
2 cm)
31.
1 in.
(
79 cm)
29
.6
i
n
. (75
.1 cm
)
40.
25
i
n
.
(102
.2
cm
)
24 in.
(61 cm)
13.1 in.
(33.3 cm)
22.38 in.
(56.8 cm)
36 in.
(
91.
44 cm)
14.
6 in.
(3
7.
08 cm)
FLW2045N
1 Safety Glasses
2 Wood Block
3 Wrench
4 Screwdriver
5 Pliers
6 Socket Wrench
7 Level
Figure 2
9/1 6 "
1
2
5
6
4
3
7