Samsung SCH-U430NSPVZW - Manual (Page 75)

Changing Your Settings 72
• Emergency Tone: Allows you to set the alert for emergency dialing.
The options for the emergency tone are:
– Alert : Phone plays the Emergency Dialing tone except when the master
volume setting is Vibrate or All Sounds Off.
Note: If Emergency Tone is set to Alert and Master Volume is set to Vibrate,
the handset will vibrate after emergency dialing.
If Emergency Tone is set to Alert and the master Volume is set to All
Sounds Off, the handset will not sound after emergency dialing.
– Vibrate : Phone will vibrate only and will not play the Emergency Dialing
tone.
Note: If Emergency Tone is set to Vibrate and Master Volume is set to All
Sounds Off, the handset will not sound after emergency dialing.
– Off : Phone will not play the Emergency Dialing tone or vibrate.
• Device Connect: allow you to set a notification when you connect
to a device.
Keypad Sounds
Select the sound of the keypad when pressed.
1. From the home screen, press MENU.
2. Press for Settings & Tools menu.
3. Press Sounds Settings.
4. Press
Keypad Sounds.
5. Select Default or Xylophone.
6. Press to set the new dial sound.
Keypad Volume
1. From the home screen, press MENU.
2. Press for Settings & Tools menu.
3. Press Sounds Settings.
4. Press Keypad Volume.
5. Press the Directional key up or down or Volume key
to adjust the keypad volume.
6. Press SET to save.
Service Alerts
1. From the home screen, press MENU.
2. Press for Settings & Tools menu.
3. Press Sounds Settings.
4. Press Service Alerts. For the following options, you
can turn the Service Alert On or Off.
• ERI: Sounds an alert when you go into and out of your coverage
areas.
wxyz wxyz 9
4 4 ghi ghi
3 def def
wxyz wxyz 9
4 4 ghi ghi
4 ghi ghi
wxyz wxyz 9
4 4 ghi ghi
5 jkl jkl
u430.book Page 72 Wednesday, July 23, 2008 11:07 PM