Samsung HT-D4500-ZA - Manual (Page 51)

English
51
04
Basic Functions
Listening to the Radio
Using buttons on the Remote Control
Press the FUNCTION button to select FM.
Tune in to the desired station.
Preset Tuning 1 : You must fi rst add a desired
frequency as a preset. See Presetting Stations
below. To select a preset frequency, press the
STOP () button to select PRESET, and then
press the TUNING/CH (
) button to select
the preset station.
Manual Tuning : Press the STOP () button to
select MANUAL and then press the TUNING/
CH (
) button to tune in to a lower or higher
frequency.
Automatic Tuning : Press the STOP () button
to select MANUAL and then press and hold the
TUNING/CH (
) button to search the band
automatically.
Setting Mono/Stereo
Press the MO/ST button.
Each time you press the button, the
sound switches between STEREO and
MONO.
In a poor reception area, select MONO for a
clear, interference-free broadcast.
Presetting Stations
Example : Presetting FM 89.10 into memory
Press the FUNCTION button to select FM.
Press the TUNING/CH (
) button to select
<89.10>.
Press the TUNER MEMORY button.
NUMBER fl ashes on the display.
Press the TUNER MEMORY button
again.
Press the TUNER MEMORY button
before NUMBER disappears from the
display.
NUMBER disappears from the display and
the station is stored in memory.
To preset another station, repeat steps 2 to 4.
To tune to a preset frequency, press the
STOP () button to select PRESET, and then
press the TUNING/CH (
) button to
select the preset station.
1.
2.
•
•
•
•
•
1.
2.
3.
•
4.
•
•
5.
•
C
TUNER
MEMORY
Connecting an iPod/iPhone Using the
USB Cable
If the home theater is connected to an iPod/iPhone,
you can play music in the iPod/iPhone through the
home theater.
5V 500mA
Connect an iPod/iPhone to the front USB
port using a USB cable.
Your iPod is automatically turned on.
The “iPod” message appears on the TV
screen.
Press the ENTER button.
Select the music fi le to play.
- You can use the remote control or the
product to control simple playback functions
such as the PLAY, PAUSE, STOP, # /$
and /buttons. (See page 16.)
NOTE
If you want to return to the iPod menus while the
iPod player is connected using the USB cable,
press FUNCTION on the remote control or press
on the front panel of the system and select
R. IPOD. The FUNCTION mode switches as
follows: BD/DVD D. IN AUX R. IPOD
FM
1.
•
•
2.
3.
✎

HT-D4500_XAA_1223.indd 51 HT-D4500_XAA_1223.indd 51 2011-12-23 3:40:26 2011-12-23 3:40:26