Samsung HL50A650C1FXZA - Manual (Page 22)

English -
Storing Channels in Memory (Automatic Method)
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then press the ENTER button.
Press the ▲ or ▼ button to select Auto Program, then press the ENTER
button.
Press the ▲ or ▼ button to select an antenna connection, then press the
ENTER button.
➢ Air: Air antenna signal.
Cable: Cable antenna signal.
Auto: Air and Cable antenna signals.
4 When selecting the Cable TV system:
Press the ENTER button to start the auto program.
Press the ◄ or ► to select the correct analog signal cable system source
among STD, HRC, and IRC, then press the ENTER button. If you have Digital
cable TV, select the cable system signal source for both Analog and Digital.
➢ STD, HRC, and IRC identify various types of cable TV systems. Contact
your local cable company to identify the type of cable system that exists in
your particular area. At this point the signal source has been selected.
5 The TV begins memorizing all available stations.
➢ After all the available channels are stored, it starts to remove scrambled
channels (see page 45). The Auto program menu then reappears.
➢ If you want to stop Auto Programming, press the ENTER button.
The Stop Auto Program? message will be displayed. Select Yes by press-
ing the ◄ or ► button, then press the ENTER button.
Press the EXIT button to exit.
Return Enter
Auto Program
Select the antennas to memorize.
Air
Cable
Auto
Move
Start
Start
Start
Channel
Antenna : Air
Auto Program ►
Clear Scrambled Channel
Channel List
Fine Tune
Signal Strength
Auto Program
Auto Program is incomplete.
3 channels are memorized.
Air : 3 Cable : 0
Return Enter
OK
Auto Program
Auto Program in Progress.
Stop
Air 3
3%
DTV Air : -- Air : 3
DTV Cable : -- Cable : --
Enter Return
Return Enter
Auto Program
Select the cable system.
Analog
Digital
STD HRC IRC
HRC IRC STD
Move
Start
BP68-00660A-00Eng_1.indd 22 2008-02-11 오후 8:39:24