Installing the water line – Samsung RSG309AARS-XAA User Manual

Page 13

English - 13

SETTING

Connecting to the water supply line

1. First, shut off the main water supply line and

turn the ice-maker off.

2. Locate the nearest cold, drinking water line.

3. After connecting the water supply with water

filter, turn on water supply and Flush 3 gallons
through filter before use (flush approximately 6
minutes).

Water line installation kit

Cold water line

Pipe clamp

Shut off valve

INSTALLING THE WATER LINE

Connecting the water line to the

Refrigerator.

There are several items that you need to purchase
to complete this connection.
You may find these items sold as a kit at your local
hardware store.

• ¼” compression nut
• copper tubing

• plastic tubing
• ferrule

Compression Nut

(1/4”) (Assembled)

Ferrule

(Not supplied)

Plastic Tubing
(Assembled)

Compression
Fitting (Assembled)

Bulb

Compression
nut (B) (1/4”)
(Not supplied)

Copper tubing

(Not supplied)

Plastic tubing (B)
(Not supplied)

Household water supply line

Refrigerator

1. Connect the household water line to the

assembled compression fitting.

- If you are using copper tubing, slip the

compression nut (

B ) (not included) and ferrule

(not included) on copper tubing (not included)
as shown.

- If you are using plastic tubing (

B ), insert the

molded end (Bulb) of the plastic tubing (

B ) into

the compression fitting.

Do not use without the molded end (Bulb)
of the plastic tubing (

B ).

2. Tighten the compression nut (

B ) onto the

compression fitting.
Do not over-tighten the compression nut (

B ).

3. Turn water on and check for any leakage.

Only connect the water line to a drinkable
water source.
If you have to repair or disassemble the
water line, cut off 1/4“ of the plastic tubing
to make sure you get a snug, leak-free
connection.

CAUTION

DA68-02500B-13.indb 13

13. 12. 4. �� 7:12