Samsung RF23HSESBSR-AA - Manual (Page 16)

CAUTION
To prevent the refrigerator from tipping over and
causing personal injury or property damage, both
control levers must be firmly touching the floor.
CAUTION
If the refrigerator is on an uneven floor, it may tilt.
To prevent this, adjust the legs so they contact
the floor firmly.
If the right side is lower, perform the same
procedure, but with the right control lever.
It is difficult to remove the front leg
cover from the refrigerator, so we do not
recommend making small adjustments
with the control lever.
Instead, refer to the next page for the best
way to make minor adjustments to the
doors.
MAKING MINOR
ADJUSTMENTS TO THE
DOORS
A leveled refrigerator is necessary for getting the
doors perfectly even.
For leveling instructions, review the previous
section on leveling the refrigerator.
Adjustment part
Fixed part
The left door is fixed.
To make minor door adjustments, adjust
only the right door.
1. Pull out the flex door ( 1 ) to reveal the lower
hinge ( 2 ).
2. Insert the supplied allen wrench (5/32”) ( 3 )
into the shaft ( 4 ) of the lower hinge.
3. Adjust the height by turning the hex wrench
( 3 ) clockwise ( DOWN ) or counter clockwise
( UP ).
When you turn the hex wrench counter-
clockwise ( ), the door will move up.
(1)
(2)
(3)
(3)
(4)
English - 16