Samsung RF23HSESBSR-AA - Manual (Page 15)

5. Holding the top of the Freezer Drawer, pull it
out all the way, and then remove it from the rail
system.
CAUTION
Be careful not to scratch or dent the sliding rail by
letting it strike the floor.
CAUTION
Make sure that you mount the freezer basket in
the right position when removing / installing the
freezer door.
Failing to do so may result in the door not opening
or closing properly.
RE-ASSEMBLING THE
FREEZER DOOR
To reattach the drawer after you have moved the
fridge to its final location, assemble the parts in
reverse order.
LEVELING THE
REFRIGERATOR
Make sure the refrigerator is level so that you can
make final adjustments.
Use a level to test if the refrigerator is level both
side to side and back to front.
If the refrigerator is not level, you will not be able
to get the doors perfectly even, which may cause
moisture condensation and increased energy bills.
Below is an example of how to level the
refrigerator if the left side of the refrigerator is
lower than the right side.
How to level the refrigerator
1. Open the freezer drawer and remove the lower
basket.
2. Remove the leg cover to adjust the leg.
3. Insert a flat-blade screwdriver (-) into the notch
on the left control lever, and turn it counter-
clockwise or clockwise to level the refrigerator.
(You turn the lever clockwise to lower the
refrigerator and counterclockwise to raise it.)
Flat-blade screw
driver (-)
Control Lever
English - 15
SETTING
UP