Samsung LNT3753HX-XAA - Manual (Page 66)

English - 64
Problem Possible Solution
Horizontal bars appear to flicker,
jitter or shimmer on the image.
Adjust the Coarse tuning and then adjust the Fine tuning.
Vertical bars appear to flicker,
jitter or shimmer on the image.
Adjust the Coarse tuning and then adjust the Fine tuning.
�creen is black and power
indicator light blinks steadily.
On your computer check: Power, �ignal Cable.
The TV is using its power management system.
Move the computer's mouse or press any key on the keyboard.
Image is not stable and may
appear to vibrate when you have
a computer connected to the PC
input.
If the setting is not correct, use your computer utility program to change the display
settings.
Your TV supports multiscan display functions within the following frequency domain:
Horizontal frequency (kHz) 3�~6�
Vertical frequency (Hz) 6�~��5
PC Maximum refresh rate
(at 6� Hz)
136� x ��68
Image is not centered on the
screen.
Adjust the horizontal and vertical position.
The screen position must be adjusted on the output source (i.e. �TB) with a digital signal.
The TFT LCD panel uses a panel consisting of sub pixels (3 14�� 264) which require sophisticated technology to produce.
However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the
product.
BN68-01156M-Eng-0903.indd 64 2007-09-03 �� 2:17:21