Samsung LNT3753HX-XAA - Manual (Page 21)

English - 1
Setting Up the Remote to Operate Your DVD
1. Turn off your DVD.
2. Press the DVD button on your TV’s remote control.
. Press the SET button on your TV’s remote control.
4. Using the number buttons on your remote control, enter three digits of the DVD code
listed on page 21~22 of this manual for your brand of DVD.
Make sure you enter three digits of the code, even if the first digit is a “�”.
(If there is more than one code listed, try the first one.)
. Press the POWER button on the remote control.
Your DVD should turn on if your remote is set up correctly.
If your DVD does not turn on after set up, repeat steps 2, 3, and 4, but try one of the
other codes listed for your brand of DVD.
If no other codes are list-ed, try each code, ��� through 141.
Note on Using Remote Control Modes: DVD
When your remote control is in “DVD” mode, the volume buttons still control your TV’s
volume.
Setting Up the Remote to Operate Your STB
1. Turn off your �TB.
2. Press the STB button on your TV’s remote control.
. Press the SET button on your TV’s remote control.
4. Using the number buttons on your remote control, enter three digits of the �TB code
listed on page 22 of this manual for your brand of �TB.
Make sure you enter three digits of the code, even if the first digit is a “�”.
(If there is more than one code listed, try the first one.)
. Press the POWER button on the remote control.
Your �TB should turn on if your remote is set up correctly.
If your �TB does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other
codes listed for your brand of �TB.
(If no other codes are listed, try each code, ��� through ���4.)
Note on Using Remote Control Modes: �TB
When your remote control is in “�TB” mode, the volume buttons still control your TV’s
volume.
BN68-01156M-Eng-0903.indd 19 2007-09-03 �� 2:16:21