Samsung HT-AS601TH-XAA - Manual (Page 36)

34
Press SURROUND button briefly to select “NEO:6” Mode.
• Each time you press this button, DPL ll x ➝ NEO:6 ➝ SFE ➝ STEREO will be
selected in turn.
Press SELECT( ) button.
• Each time you press this button, MUSIC ➝ CINEMA will be selected in turn.
Press SETUP button.
• “SETUP MODE” appears on the display and enters into Setup Mode.
Press INPUT button 10 times.
• “NEO:6 MODE” appears on the display.
Press SURROUND button.
• “CEN-IMG” appears on the display.
Press SELECT( ) button to set the sound image you want.
• You can set the sound image from 0 to 5.
• You can use this function to set the sound image of Center Speaker
only via the main unit.
To Exit Setup Mode
• Wait for about 5 seconds or turn VOLUME CONTROL of the main unit. ‘SETUP MODE OFF’ appears
on the display and exits Setup Mode.
If TV (or screen) is installed high on a wall, you can raise the sound image
of the Center Speaker to compensate.
MAIN UNIT
1
1
2
3
4
2
To Set Sound Image of Center Speaker
,
,
OPERA
TION
HT-AS601B SEA 2005.4.15 9:33 AM Page 37