9 dram static read control [auto, 10 dram dynamic write control [auto, 11 ai clock twister [auto – Asus EVOLUTION P5E64 WS User Manual
Page 92: 12 ai transaction booster [auto, 13 cpu voltage [auto, Dram static read control -22
4-22
Chapter 4: BIOS setup
ALL PRE to REF Delay [Auto]
Configuration options: [Auto] [ 1 DRAM Clocks]~[15 DRAM Clocks]
4.4.9
DRAM Static Read Control [Auto]
Adjusting this item might enhance DRAM overclocking ability.
Configuration options: [Auto] [Disabled] [Enabled]
4.4.10 DRAM Dynamic Write Control [Auto]
Adjusting this item might enhance DRAM overclocking ability.
Configuration options: [Auto] [Disabled] [Enabled]
4.4.11 Ai Clock Twister [Auto]
Allows you to set the DRAM performance. Set this item to [Light] or [Lighter]
to enhance DRAM stability, or [Strong] or [Stronger] to accelerate DRAM
performance.
Configuration options: [Auto] [Lighter] [Light] [Moderate] [Strong] [Stronger]
4.4.12 Ai Transaction Booster [Auto]
Allows you to set the system performance.
Configuration options: [Auto] [Manual]
The following two sub-items appear only when you set the Ai Transaction
Booster item to [Manual].
Common Performance Level [05]
Set this item to a higher level for better compatibility or a lower level for better
performance. Use the <+> and <-> keys to adjust the value. The values
range from 1 to 31.
Pull-In of CHA/B PH1/2/3/4/5 [Disabled]
Set this item to [Enabled] to apply enhancement on DRAM Channel A and B,
Phase 1 to 5. The number of phases is determined by DRAM frequency and
FSB strap.
Configuration options: [Disabled] [Enabled]
The following seven items are adjusted by typing the desired values using the
numeric keypad and press the
keys to adjust the value. To restore the default setting, type [auto] using the
keyboard and press the
4.4.13 CPU Voltage [Auto]
Allows you to set the CPU VCore voltage. The values range from 0.85000V to
1.70000V with a 0.00625V interval.