30 chapter 2: hardware information – Asus EVOLUTION P5E64 WS User Manual
Page 56
2-30
Chapter 2: Hardware information
5. USB connectors (10-1 pin USB78, USB 910, USB1112)
These connectors are for USB 2.0 ports. Connect the USB module cable
to any of these connectors, then install the module to a slot opening at the
back of the system chassis. These USB connectors comply with USB 2.0
specification that supports up to 480 Mbps connection speed.
You can connect the USB cable to ASUS Q-Connector (USB, blue) first, and
then install the Q-Connector (USB) to the USB connector onboard.
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
P5E64 WS EVOLUTION
®
P5E64 WS Evolution
USB 2.0 connectors
USB910
USB78
USB+5V USB_P8
-
USB_P8
+
GND NC
USB+5V USB_P7
-
USB_P7
+
GND
USB+5V USB_P10- USB_P10+ GND NC
USB+5V USB_P9
-
USB_P9
+
GND
USB+5V USB_P12
-
USB_P12
+
GND NC
USB+5V
USB_P1
1-
USB_P1
1+
GN
D
PIN1
USB1112
6. IEEE 1394a port connector (10-1 pin IE1394_1)
This connector is for an IEEE 1394a port. Connect the IEEE 1394a module
cable to this connector, then install the module to a slot opening at the back
of the system chassis.
Never connect a USB cable to the IEEE 1394a connector. Doing so will damage
the motherboard!
You can connect the 1394 cable to ASUS Q-Connector (1394, red) first, and
then install the Q-Connector (1394) to the 1394 connector onboard.
P5E64 WS EVOLUTION
®
P5E64 WS Evolution
IEEE 1394a connector
IE1394_2
PIN 1
GN
D
+12V
TPB1
-
GN
D
TP
A1-
+12V
TPB1
+
GND
TP
A1+