Dram configuration, Timing mode [auto, Memclock index value (mhz) – Asus Motherboard A8N-SLI SE User Manual
Page 79: Cas# latency (tcl), Ras# to cas# delay (trcd), Asus a8n-sli se 4-21
ASUS A8N-SLI SE
4-21
DRAM Configuration
The items in this sub-menu show the DRAM-related information
auto-detected by the BIOS.
F1:Help ↑↓ : Select Item
-/+: Change Value
F5: Setup Defaults
ESC: Exit →←: Select Menu
Enter: Select Sub-menu
F10: Save and Exit
Select Menu
Item Specific Help
configuration by
Auto] is recommended.
[Manual] allows you to
set each
configuration on your
own.
DRAM Configuration
Timing Mode
[
Auto
]
x Memclock index value (Mhz)
400Mhz
x CAS# latency (Tcl)
3
x Min RAS# active time(Tras)
8T
x RAS# to CAS# delay (Trcd)
3T
x Row precharge Time (Trp)
3T
x Row cycle time (Trc)
1
1T
x Row refresh cycle time (Trfc)
14T
x Read-to-Write time (Trwt)
5T
x Write Recovery time (Twr)
3T
x 1T/2T Memory Timing
2T
S/W DRAM Over 4G Remapping
[Enabled}
H/W DRAM Over 4G Remapping
[Enabled}
Phoenix-Award BIOS CMOS Setup Utility
Advanced
Timing Mode [Auto]
Sets the timing mode. Configuration options: [Auto] [Manual]
Memclock index value (Mhz)
Shows the memory clock index value. This item is not configurable.
CAS# latency (Tcl)
Shows the CAS# latency. This item is not configurable.
Min RAS# active time (Tras)
Shows the minimum RAS# active time. This item is not configurable.
RAS# to CAS# delay (Trcd)
Shows the RAS# to CAS# delay to Rd/Wr command on the same bank.
This item is not configurable.