Eco sensor and screen brightness – Samsung UN85S9VFXZA User Manual
Page 24
✎
NOTE
• Standard dimensions for wall mount kits are shown in the table below.
• Do not use screws that do not comply with VESA standard screw
specifications.
• Do not use screws that are longer than the standard length or do not
comply with VESA standard screw specifications. Screws that are too
long may cause damage to the inside of the TV set.
• For wall mounts that do not comply with the VESA standard screw
specifications, the length of the screws may differ depending on the
wall mount specifications.
• Do not fasten the screws too firmly. This may damage the product or
cause the product to fall, leading to personal injury. Samsung is not
liable for these kinds of accidents.
• Samsung is not liable for product damage or personal injury when a
non-VESA or non-specified wall mount is used or the consumer fails to
follow the product installation instructions.
• Always have at least three people mount the TV on to a wall.
Product Family
TV size in inches
VESA screw hole specs
(A * B) in millimeters
Standard Screw
Quantity
LED-TV
[UHD]
85
1000 X 800
M8
4
Do not install your Wall Mount Kit while your TV is turned
on. It may result in personal injury from electric shock.
Eco Sensor and Screen Brightness
Eco Sensor measures the light in your room and optimizes the brightness
of the TV automatically to reduce power consumption. This causes the TV
to brighten and dim automatically. If you want to turn this function off, go to
Menu > System > Eco Solution > Eco Sensor
Eco Sensor
[ Do not block the sensor with
any material. It can decrease
picture brightness.
English - 24
English - 25
[UN85S9VF-ZA]BN68-05628A-00ENG.indb 24
2013-10-29 �� 1:30:56