Maintenance, After finishing a recording – Samsung SC-D77-XAA User Manual

Page 92

ENGLISH

✤

At the end of a recording you must remove the power source.

✤

Leaving the battery pack on the camcorder after completing recording will reduce battery life.

After completing a recording session

1. Slide the EJECT switch in the direction of the arrow

■

Opening the cassette door ejects the tape automatically.

■

Wait until the tape is completely ejected.

2. After removing the tape, close the door and store the camcorder in a dust free environment.

■

Dust and other foreign materials can cause image degradation.

3. Set the power switch to OFF mode.

4. Disconnect the power source or remove the Lithium Ion Battery Pack.

■

When connecting a power supply, separate it in reverse order by referring to page 21.

■

Hold down the BATT. RELEASE button and slide the battery pack in the direction of the arrow.

Maintenance

After finishing a recording

OFF