Samsung HLT6189SAX-XAA - Manual (Page 82)

English - 82
Setting Up Anynet+
The following settings are to use Anynet+ functions.
To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On
1 Press the MENU button.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
2 Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC), then press the ENTER button.
3 Press the ENTER button to select Anynet+ (HDMI-CEC), then press the ENTER
button.
4 Press the ▲ or ▼ button to select On, then press the ENTER button.
➢ The Anynet+ function is enabled.
➢ If you select Off, Anynet+ is disabled.
➢ When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related
operations are deactivated.
Setting an Anynet+ Device to turn Off Automatically when the TV is Turned Off
3 Press the ▲ or ▼ button to select Auto Turn Off, then press the ENTER button.
4 Press the ▲ or ▼ button to select On, then press the ENTER button.
➢ The Auto turn off function is enabled.
➢ If you select Off, the Auto turn off function is canceled.
Press the EXIT button to exit.
➢ The Select Device setting of the TV remote control is to be set to TV to use the Anynet+ function.
➢ If you set the Anynet+ (HDMI-CEC) to On, the Device List menu appears when you press the TOOLS button on the remote control.
➢ If you set Auto Turn Off to On, connected external devices are also turned off when the TV is turned off.
However, if the device is recording, it may not be turned off.
Scanning and Switching between Anynet+ Devices
1 Press the Anynet+ button.
Press the ENTER button to select Device List.
➢ Anynet+ devices connected with the TV are listed.
➢ If you cannot find a device you want, press the red button to scan for devices.
2 Press the ▲ or ▼ button to select to a particular device and press the ENTER button.
It is switched to the selected device.
➢ Only when you set Anynet+ (HDMI-CEC) to On in the Setup menu, the Device List menu
appears.
➢ Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation
during the switching operation.
➢ The time required to scan for devices is determined by the number of connected devices.
➢ When the device scan is complete, the number of found devices is not displayed.
➢ Although the TV automatically scans devices when it is turned on using the POWER button, devices connected when the TV is
already on are not displayed in the device list. Therefore press the red button to re-scan devices if necessary.
➢ If you have selected external AV device by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to
switch to an Anynet+ device by using the Anynet+ button.
Continued...
Setup
Melody : Medium
Bluetooth
Anynet+ (HDMI-CEC) ▶
SW Upgrade
Function Help
: On
Anynet+ (HDMI-CEC) Setup
Anynet+ (HDMI-CEC) : ON
Auto Turn Off :
Return Enter
Off
On
Move
Anynet+ (HDMI-CEC) Setup
Anynet+ (HDMI-CEC) : On
Auto Turn Off :
Return Enter
Off
On
Move
Device List
Headset Connection
Picture Setting
Sound Setting
Sleep Timer Off
Caption Off
Channel Add/Delete
Delete Favorite Channel
▼
Move Enter
BP68-00628B-00Eng_5.indd 82 2007-03-02 ｿﾀﾈﾄ 4:26:20