Freezing the current picture, Changing the position of the pip window, Selecting a signal source (air or cable) for pip – Samsung HLT6189SAX-XAA User Manual
Page 35: Changing the pip channel
English - 35
Freezing the Current Picture
Press the
STILL button to freeze a moving picture. (Normal sound will still be heard.)
To cancel this function, press the
STILL button again or press any button on the remote control.
Changing the Position of the PIP Window
4 Press the ▲ or ▼ button to select Position, then press the ENTER button.
Press the ▲ or ▼ button to select the desired PIP window position, then press the
ENTER button.
➢
In Double Window ( ) and Double Wide ( ) modes, Position cannot be
selected.
➢
If the PIP window is set to Double Window ( ) or Double Wide ( ) mode, the
screen size or alignment may slightly differ depending on the signal type.
Selecting a Signal Source (Air or Cable) for PIP
5 Press the ▲ or ▼ button to select Air/Cable, then press the ENTER button.
Press the ▲ or ▼ button to select
Air or Cable, then press the ENTER button.
➢
Air : Air antenna signal
Cable : Cable antenna signal
Changing the PIP Channel
6 Press the ▲ or ▼ button to select Channel, then press the ENTER button.
Press the ▲ or ▼ button at the bottom of the remote to select the desired channel in the
PIP window, then press the
ENTER button.
➢
The channel can be active when the sub picture is set to TV.
Press the
EXIT button to exit.
Press the
PIP CH and CH and buttons on the remote control to change the
PIP channel.
This function is available only when a
bluetooth printer is connected to the TV.
(Refer to page 69)
Size
:
Position
:
Air/Cable
: Cable
Channel
: Cable 3
PIP
Air
Cable
PIP
: On
Size
:
Position
:
Air/Cable
: Cable
Channel
: Cable 3
PIP
Still
Cancel
PIP
Position
:
Air/Cable
:
Cable
Channel
: Cable 3
Cable 3
BP68-00628B-00Eng_2.indd 35
2007-03-02 ｿﾀﾈﾄ 4:22:30