Samsung MX-FS8000-ZA - Manual (Page 14)

14
English English
15
Advanced Functions
Timer Function
Setting the Clock
For each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
1. Press the TIMER SET button on the remote
control twice. "CLOCK SET" is displayed.
2. Press the ENTER ( ) button on the remote
control. The hour flashes.
• Increase the hours:
TUNING/ALBUM ,
• Decrease the hours: TUNING/ALBUM .
3. When the correct hour is displayed, press the
ENTER ( ) button, and then the minutes flash.
• Increase the minutes: TUNING/ALBUM ,
• Decrease the minutes: TUNING/ALBUM .
4. When the correct minute is displayed, press the
ENTER ( ) button, and then "TIMER PLAY
SET" appears in the display.
Setting the Timer
The timer enables you to switch the product on or
off at specific times automatically.
• Before setting the timer, check that the current time
is correct.
• For each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
• If you no longer want the product to be switched
on or off automatically, you must cancel the timer
by pressing the TIMER ON/OFF button.
Example: You want to wake up to music every morn-
ing.
1. Press the TIMER SET button until TIMER PLAY SET is
displayed.
2. Press the ENTER ( ) button.
Result: ON TIME is displayed for a few seconds. You
can set the timer switch-on time.
3. Set the timer switch-on time.
a Press the TUNING/ALBUM , or . button to
set the hours.
b Press the ENTER ( ) button.
Result: The minutes flash.
c Press the TUNING/ALBUM , or . button to
set the minutes.
d Press the ENTER ( ) button.
Result: OFF TIME is displayed for a few seconds.
You can now set the timer switch-off time.
4. Set the timer switch-off time.
a Press the TUNING/ALBUM , or . button to
set the hours.
b Press the ENTER ( ) button.
Result: The minutes flash.
c Press the TUNING/ALBUM , or . button to set
the minutes.
d Press the ENTER ( ) button.
Result: VOLUME XX is displayed, where XX corre-
sponds to the volume already set.
5. Press the TUNING/ALBUM , or . button to adjust the
volume level and press the ENTER ( ) button.
Result: The source to be selected is displayed.
6. Press the TUNING/ALBUM , or . button to select the
source the Hi-Fi Component will play when it switches
on.
If you select... You must also...
FM/AM (radio) ............ a Press the ENTER ( )
button.
b Select a preset station by
pressing the TUNING/
ALBUM , or . button.
CD (compact disc) .....Load a compact disc.
USB ............................Connect the USB device.
7. Press the ENTER ( ) button.
Result: TIMER REC SET (Do you want to record?) is
displayed.
8. Press the ENTER ( ) button.
Result: REC SET YES/NO is displayed. You can press
the TUNING/ALBUM , or . button to select
REC YES or REC NO, and then press
ENTER button.
1) If you select REC NO, it will cancel tuner timer
recording even if you have already set the tuner timer
recording.
2) If you select REC YES, you can set the tuner timer
recording on and off times.
a. Press the ENTER ( ) button.
Result: ON TIME is displayed for a few seconds.
You can set the tuner timer recording switch-
on time.
b. Press the ENTER ( ) button.
Result: OFF TIME is displayed for a few seconds.
You can set the tuner timer recording switch-
off time.
MX-FS8000-ZP-ENG_130927.indd 14 2013-09-27 �� 2:01:06