Samsung MX-FS8000-ZA - Manual (Page 13)

12
English English
13
Basic Functions
Listening to the Radio
To Store the Stations You Want
You can store up to:
15 FM stations, 15 AM stations.
1. Select FM or AM by pressing the TUNER/AUX button.
2. To search for a station, press the TUNNING MODE
button on the remote control or the STOP button on
the product one or more times until MANUAL is
displayed.
• Preset : Once or more times until PRESET is
displayed. You can search the stored
frequencies in the preset mode.
• Manual : Once or more times until MANUAL is
displayed. You can search the frequencies
one by one in the Manual mode.
3. Select a station by:
• Pressing the TUNING/ALBUM , or . button on
the remote control to find a station.
4. Press the MO/ST button to switch between stereo and
mono.
• In a poor reception area, select MONO for a
clear, interference-free broadcast.
• This applies only when listening to an FM station.
5. If you do not want to store the radio station found, go
back to Step 3 and search for another station.
Otherwise:
a. Press the ENTER button.
b. Or, press the TUNING/ALBUM button on the
remote control to select a program number.
c. Press the ENTER button to save the preset.
6. To store other radio frequencies, repeat Steps 3, 4 and
5.
Selecting a Stored Station
To listen to a stored station, follow these steps:
1. Select FM or AM by pressing the TUNER/AUX
button on the product or remote control.
2. Press the TUNING MODE button on the remote
control until “PRESET” is displayed.
3. Press [,] button on the main unit or TUNING/
ALBUM , , . on the remote control to select a
preset number.
` When My Karaoke is on, EQ/GIGA SOUND and
FOOTBALL MODE does not work.
` After the stop operation, the setting of my karaoke
will disappear.
` Only when connected with a Microphone, the my
karaoke function is available.
10 Skip Function
Press the +10 or -10 button while the unit is in
playback mode. The unit will skip as many as 10
tracks forward or 10 tracks back from the current
track.
Auto Change Function
You can circularly play between the disc and the
USB.
1. Press the AUTO CHANGE button on the remote.
Each time press this button, the mode will switch as
following:
AUTO CHANGE OFF ; AUTO CHANGE ON
• When the AUTO CHANGE mode is "ON",
- the music will be played on DISC ; USB1 ; USB2
continuously.
- if you press the POWER button, function change
button or the EJECT button, the AUTO CHANGE
function automatically switches to "OFF" mode.
- the recording can't work.
- the REPEAT, SLEEP function can't work and
automatically changes to OFF.
- the CD REC SPEED, USB REC, NUMBER KEY
and DELETE function can't work.
• When USB is playing, if you disconnected the USB,
the AUTO CHANGE function automatically switches
to "OFF" mode.
• If there's no USB1, it will jump to USB2.
MX-FS8000-ZP-ENG_130927.indd 13 2013-09-27 �� 2:01:05