Samsung RF30HDEDTSR-AA - Manual (Page 19)

English - 19
OPERA
TING
( 3 ) Alarm (Hold 3 sec for Filter Reset)
The Alarm button serves two purposes:
- To turn the door open alarm on and off
- To reset the water filter life indicator.
1. Door Alarm Function
If the door alarm is set to On, an alarm beeps if
any refrigerator door is left open for more than
three minutes.
The beeping stops when you close the door.
The door alarm function is pre-set to On in the
factory.
You can turn it off by pressing and then releasing
the Alarm button.
You can turn it back on in the same fashion.
The icon lights up when the function is on.
When the Door Alarm function is on and the
alarm sound is triggered, the Door Alarm Icon
will blink while the alarm sounds.
2. Water Filter Life Indicator Function
After you replace the water filter, touch and hold
this button for 3 seconds to reset the water filter
life indicator.
When you reset the water filter life indicator, the
Filter icon on the panel turns Off.
The Filter icon will turn red to let you know it is
time to change the water filter after six months
(about 300 gallons).
Some areas have large amounts of lime in their
water, which causes the water filter to clog more
quickly. If this is the case in your area, you will
have to change the filter more frequently than
every six months.
( 4 ) Lighting (Hold 3 sec for ºC
↔
ºF)
Lighting button serves two purposes:
- To turn the dispenser light on and off
- To switch the temperature units between ºC
and ºF
1. Light Function
Touching the Lighting button turns on the
Dispenser LED lamp in continuous mode so that
it stays on continuously. The button also lights
up. If you want the Dispenser lamp to come on
only when some one uses the dispenser, press
the Lighting button to turn the continuous mode
off.
2. To switch the temperature units between ºC
and ºF,
Touch and hold this button for 3 seconds to
select the temperature display you want.
Each time you press and hold the button, the ºC
and ºF temperature modes alternate and the ºC
or ºF icon lights up, indicating your selection.
( 5 ) Fridge (Hold 3 sec for Power Cool)
The Fridge button serves two purposes:
- To set the Fridge to your desired temperature.
- To turn the Power Cool function on and off.
1. To set the Fridge temperature, press the
Fridge button.
You can set the temperature between 34 °F
(1 °C) and 44 °F (7 °C).
2. Power Cool function
Touch and hold this button for 3 seconds to
decrease the time needed to cool products in
the Refrigerator.
It can be helpful if you need to quickly cool easily
spoiled items or if the temperature in the fridge
has warmed dramatically (For example, if the
door was left open).
( 6 ) Ice Off (Hold 3 sec for Child Lock)
The Ice Off button serves two purposes:
- To turn the Ice maker on and off
- To turn the Child Lock Function on and off.
1. Ice Off Function
If you don’t want to make more ice, press the Ice
Off button.
2. Child Lock Function
Touch and hold this button for 3 seconds to
lock the display, the Flex Zone panel, and the
dispenser buttons so the buttons can not be
used.
When the Child Lock is on, the refrigerator does
not dispense ice or water even if you press the
Dispenser Lever.
The child lock icon lights up to indicate you’ve
activated the child lock function.
Press 3 seconds to unlock.
DA68-03028A-02.indb 19 14. 6. 5. �� 1:24