Samsung SF-565P-XAA - Manual (Page 37)

G ETTING S TARTED
1.22
Installing Samsung Software
N
OTES
: Cancel the “New Hardware Found” window when your
computer boots up.
1 Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run and an installation
window appears.
If the installation window does not appear, click Start and
then Run. Type X:\Setup.exe, replacing “X” with the
letter of your drive and click OK.
If you use Windows Vista, Windows 7 and Windows Server 2008
R2, click
Start → All programs → Accessories → Run , and
type X:\ Setup.exe .
If the AutoPlay window appears in Windows Vista, Windows 7
and Windows Server 2008 R2, click Run Setup.exe in Install
or run program field, and click Continue in the User
Account Control window.
2 When the following window opens, connect your machine to
the computer and turn the printer on. Then click Next.
If the machine is already connected and turned on, this
screen does not appear. Skip to the next step.
N OTE : If you click Next and the machine is not connected to the
computer, an alert message window appears. After connecting the
machine and turning it on, click Yes. Or, if you want to install the
software without the machine, Click No.